Consider a closed surface S surrounding volume V. If is the position vector
of a point inside S, with the unit normal on S, the value of the integral is

**A. ** 3V

**B. ** 5V

**C. ** 10V

**D. ** 15V

**Answer : ****Option D**

**Explaination / Solution: **

From Divergence theorem, we have

From Divergence theorem, we have

The position vector

Here, , thus

Workspace

Report

A current sheet lies on the dielectric interface x = 0
between two dielectric media with ε_{r1} = 5, μ_{r1} = 1 in Region -1 (x < 0) and εr2 = 5, μr2 = 2 in Region -2(x > 0) . If the magnetic field in Region-1 at
x = 0^{-} is the magnetic field in Region-2 at x = 0^{+} is

**A. **

**B. **

**C. **

**D. **

**Answer : ****Option A**

**Explaination / Solution: **

From boundary condition

From boundary condition

Then from Boundary condition

Comparing we get A = 30 and B =- 10

Workspace

Report

A dielectric slab with 500mm x 500mm cross-section is 0.4m long. The slab is
subjected to a uniform electric field of . The relative
permittivity of the dielectric material is equal to 2. The value of constant ε_{0} is 8.85 × 10^{-12} F/m. The energy stored in the dielectric in Joules is

**A. ** 8.85 × 10-11

**B. ** 8.85 × 10-5

**C. ** 88.5

**D. ** 885

**Answer : ****Option B**

**Explaination / Solution: **

No Explaination.

No Explaination.

Workspace

Report

The electric field component of a time harmonic plane EM wave traveling in a nonmagnetic lossless dielectric medium has an amplitude of 1 V/m. If the relative permittivity of the medium is 4, the magnitude of the time-average power density vector (in W/m^{2}) is

Intrinsic impedance of EM wave

Time average power density

Workspace

Report

The electric and magnetic fields for a TEM wave of frequency 14 GHz in a
homogeneous medium of relative permittivity ε_{r} and relative permeability

**A. ** εr = 3, Ep= 120π
**B. ** εr = 3, Ep= 360π

**C. ** εr = 9, Ep= 360π

**D. ** εr = 9, Ep= 120π

**Answer : ****Option D**

**Explaination / Solution: **

From the expressions of we can write,

Assuming the speed of light in free space to be 3 × 10^{8} m/s, the intrinsic
impedance of free space to be 120π, the relative permittivity εr of the medium
and the electric field amplitude Ep are

From the expressions of we can write,

Workspace

Report

Two infinitely long wires carrying current are as shown in the figure below. One wire is in the y - z plane and parallel to the y axis. The other wire is in the x - y plane and parallel to the x - axis. Which components of the resultingmagnetic field are non-zero at the origin ?

**A. ** x,y,z components

**B. ** x,y components

**C. ** y, z components

**D. ** x,z components

**Answer : ****Option D**

**Explaination / Solution: **

Due to 1 A current wire in x - y plane, magnetic field be at origin will be in x direction.

Due to 1 A current wire in y - z plane, magnetic field be at origin will be in z direction.

Thus x and z component is non-zero at origin.

Due to 1 A current wire in x - y plane, magnetic field be at origin will be in x direction.

Due to 1 A current wire in y - z plane, magnetic field be at origin will be in z direction.

Thus x and z component is non-zero at origin.

Workspace

Report

If a vector field is related to another vector field through which of the following is true? (Note : C and SC refer to any closed contour and any surface whose boundary is C . )

**A. **

**B. **

**C. **

**D. **

**Answer : ****Option B**

**Explaination / Solution: **

Hence (B) is correct option.

Hence (B) is correct option.

Workspace

Report

A plane wave having the electric field components V/m and traveling in free space is incident normally on a lossless medium with which occupies the region y ≥ 0. The reflected magnetic field component is given by
**A. **

**B. **

**C. **

**D. **

**Answer : ****Option A**

**Explaination / Solution: **

In the given problem

In the given problem

Reflection coefficient

negative So magnetic field component does not change its direction Direction of incident magnetic field

So, reflection magnetic field component

Workspace

Report

The silicon sample with unit cross-sectional area shown below is in thermal equilibrium. The following information is given: T = 300 K electronic charge = 1.6 × 10^{-19} C, thermal voltage = 26 mV and electron mobility = 1350 cm^{2} / V-s

The magnitude of the electric field at x = 0.5 μm is

No Explaination.

Workspace

Report

The silicon sample with unit cross-sectional area shown below is in thermal equilibrium. The following information is given: T = 300 K electronic charge = 1.6 × 10^{-19} C, thermal voltage = 26 mV and electron mobility = 1350 cm^{2} / V-s

The magnitude of the electron of the electron drift current density at x = 0.5 μm is

Electron drift current density

Workspace

Report

**Preparation Study Material**- Circuit Analysis (Study/Preparation)
- Digital Electronics (Study/Preparation)
- Signals and Systems (Study/Preparation)
- Communication Theory (Study/Preparation)
- Basic Electrical and Instrumentation Engineering (Study/Preparation)
- Electrical Engineering and Instrumentation (Study/Preparation)
- Electronic Devices (Study/Preparation)
- Linear Integrated Circuits LIC (Study/Preparation)
- Electronic Circuits I (Study/Preparation)
- Electronic Circuits II (Study/Preparation)
- Control System Engineering (Study/Preparation)
- Digital Communication (Study/Preparation)
- Digital Signal Processing (Study/Preparation)
- Microprocessors and Microcontrollers (Study/Preparation)
- Electromagnetic Theory (Study/Preparation)