Q1.The survey carried out to delineate natural features, such as hills, rivers, forests and manmade
features, such as towns, villages, buildings, roads, transmission lines and canals is
classified as
Answer : Option DExplaination / Solution:
Topographic survey is carried out to delineate natural features.
Q2.The chainage of the intersection point of two straights is 1585.60 m and the angle of
intersection is 140o . If the radius of a circular curve is 600.00 m, the tangent distance (in m)
and length of the curve (in m), respectively are
Q4.As per IS 800: 2007 the cross-section in which extreme fibre can reach the yield
stress but cannot develop the plastic moment of resistance due to local buckling
is classified as
Answer : Option CExplaination / Solution:
As per clause 3.7.2 of IS 800:2007
Q6.The local mean time at a place located in longitude 90o 40' E when the standard
time is 6 hours and 30 minutes and the standard meridian is 82o 30' E is
Answer : Option DExplaination / Solution: No Explaination.
Q7.A bench mark has been established at the soffit of an ornamental arch at the
known elevation of 100.0 m above mean sea level. The back sight used to establish
height of instrument is a inverted staffreading of 2.105 m. A forward sight reading
with normally held staff of 1.105 m is taken on a recently constructed plinth. The
elevation of the plinth is
Answer : Option DExplaination / Solution: No Explaination.
Q10.The magnetic bearing of a line AB was N 59o 30' W in the year 1967, when the
declination was 4o 10' E. If the present declination is 3o W, the whole circle
bearing of the line is
Answer : Option BExplaination / Solution: No Explaination.
Total Question/Mark :
Scored Mark :
Mark for Correct Answer : 1
Mark for Wrong Answer : -0.5
Mark for Left Answer : 0