CE GATE 2013 - Online Test
Q1. The “Plane section remain plane” assumption in bending theory implies
Answer : Option A
Explaination / Solution:
No Explaination.
Q2. Two steel column P (length L and yield strength fy = 250MPa) and Q (length 2L
and yield strength fy = 500MPa) have the same cross-section and end condition.
The ratio of buckling load of column P to that of column Q is
Answer : Option D
Explaination / Solution:
Buckling load,
Q3. Maximum possible value of compaction factor for fresh (green) concrete is
Answer : Option B
Explaination / Solution:
No Explaination.
Q4. Friendship, No matter how ____________ it is, has its limitation
Answer : Option B
Explaination / Solution:
Friendship, No matter how intimate it is, has its limitation. Intimate refers to
close personal relations, e.g. an intimate friend. It is also characterized by or
involving warm friendship or a personally close or familiar association or feeling.
Q5. Beam subjected to moving distributed load of 4 kN/m maximum shear force that
can occur just to right of Q is
Answer : Option C
Explaination / Solution:
When a cut is made just to the right of Q and displacements are given such that
A’B’ is parallel to B’C’, as B’ is very close to Q, displacement of B’ to the left will
be zero and that to the right will be 1.
Hence slope of B'C' = 1/20 ⇒ Slope of B'A ' = (1/20)×5 = 0.25
ordinate at A ' = (1/20)×5 = 0.25; ordinate at D' = (1/20)×5 = 0.25
If udl is loading span PR, we get maximum SF just to the right of Q
⇒ SF = ((1/2)×0.25×10+(1/2)×20×1)×4 = 45 kN
Q6. A number much greater than 75 and smaller than 117 is
Answer : Option D
Explaination / Solution:
No Explaination.
Q7. A firm is selling it product at Rs. 60/unit. The total cost of production is Rs. 100
and firm is earning total profit of Rs. 500. Later, the total cost increased by 30%.
By what percentage the price should be increased to maintain the same profit
level
Answer : Option A
Explaination / Solution:
No Explaination.
Q8. Abhishek is elder to Savan, Savan is younger to Anshul. The correct relations is
Answer : Option D
Explaination / Solution:
No Explaination.
Q9. 2010 2011
Raw material 5200 6240
Power & fuel 7000 9450
Salary & wages 9000 12600
Plants & machinery 20000 25000
Advertising 15000 19500
Research & development 22000 26400
Which one of the following increased by same percentage in year 2010-2011?
Answer : Option D
Explaination / Solution:
% increase in raw material = ((6240 - 5200)/5200)×100 = 20%
% increase research and development = ((26400 - 22000)/22000)×100 = 20%
Q10. The professor ordered to the student to go out of the class
(I) (II) (III) (IV)
The incorrect one is
Answer : Option B
Explaination / Solution:
No Explaination.
